Make sure to leave a comment below to be entered to receive BLOG CANDY from me! Win Happy Mail from me. I will draw a name from comments left through 12-9.2018 5pm ET!
Blog Candy will ship to US address only.
This hop is all about helping you create bags and tags for the holidays! Cello bags are DEFINITELY part of my crafting stash as they make for quick packaging. Here’s a great project for teacher gifts, co-workers, table gifts, etc…! And BONUS! great to use up Designer Paper.
It stands ~ 4-3/4″ tall
Materials
2-3/4″ x 9-1/2″ Designer Paper – All is Bright used
1-3/4″ Circle Punch or die cut any image of your choice.
1 each 3″ x 6″ Gusseted Cellophane Bag
Scrap of Whisper White Cardstock for stamping.
2-3/4″ x1″ cardstock for bag bottom.
Especially around this busy holiday season, it’s nice to have quick products that are WOWs at the same time.
General Instructions: Fold designer paper in half. Punch circle towards bottom. Add cardstock piece to bottom of cello bag. Fill with candy. Insert designer paper on the INSIDE of the bag. Staple top closed. Add bow to cover ribbon. Stamp To/From on scrap whisper white with Real Read Ink. Punch out with circle punch and add to back cover staple on the back side…DONE!
Reminder to leave a comment to be entered to win my Blog Candy!!!!
Hi Everyone! This card was Pinterest Poached! I tweaked it a bit 😉 a very little bit. But a big shout out to Debbie Prims for sharing her creation.
This card using products from the bundle Winter Woods. The bundle is made up of Winter Woods Stamp Set & In the Woods Framelits Dies. AND just like yesterday’s post, Shimmery White Paper was used!
I’m ALL about adding a 3-D element to the inside of the cards. I think it elevates the card, don’t you? 🙂
Cardstock Measurements:
Mossy Meadows: 8-1/2″ x 5-1/2″ plus scraps for die cutting
Soft Suede: 4-1/8″ x 5-3/8″ plus scraps for die cutting
Shimmery White: (2) 4″ x 5-1/4″ plus ~ 3″ x 5-1/4″ for snow bank
General Instructions:
Die cut pinecone, pine sprigs, and tree images. Layer and add sparkle to trees. I used retired Dazzling Details – why not use up? but you can sub out with Dazzling Diamonds Glitter. Set aside to dry. Stamp tree background on upper half of Shimmery White. Tear snow bank edge. Stamp sentiment. Layer all on card front as shown. Add pinecone and sprigs to inside of card. I left out the sentiment on the inside as it can serve as a holiday card, holiday thank you card, etc.. I’m keeping my options open!
If you need anything to make the card as shown, the products used are listed below. Click on the image that you might need!
Hi Everyone! Here’s another card from my local card class this week. This card uses First Frost Bundle. What I love about this bundle is it’s versatility! It goes beyond the holidays so it’s a great value.
I had a hard time capturing how gorgeous this card is! The white is Shimmery White Cardstock. It has a subtle glitter to it. But you can still stamp full images on it. AND Frosted Florals Specialty Designer Paper has a pearl gloss..another GORGEOUS paper that goes past the holidays and into other winter cards.
Measurements for cardstock and designer paper:
Mint Macaroon: 4-1/4″ x 11″, scraps for die cutting
Shimmery White: for inside 4″ x 5-1/4″, scraps for die cutting
Whisper White: 4-1/8″ x 5-3/8″
Frosted Florals Specialty Designer Paper: 4″ x 5-1/4″
General Instructions:
Stamp and/or die cut elements for card front. Stamp inside images. Add to card! TIP! When stamping the florals on the Shimmery White, stamp off once or twice (ink, stamp on scrap paper once or twice then stamp onto element.)
If you need anything to complete this card, a list of products is found below. Click on any image of the product you may need.
Hi Everyone! This is one of my cards for my local card class tomorrow. The card features Snowflake Showcase products – The die and stamps are only available through November 30th! I paired it with the Joyous Noel Designer Paper which was so popular it sold out!
For me, the snowflake is the star of the show and put it front and center. The star is die cut out of Sahara Sand Cardstock and sponged with Copper Shimmer Paint.
The inside of the card is equally beautiful with a 3-D embellishment. For the front of the card, one could take Merry Merlot cardstock and use embossing powder to create the feel of the designer paper.
Measurements of Cardstock and Designer Paper:
Merry Merlot: 8-1/2″ x 5-1/2″, scrap for inside snowflake
Sarah Sand: (2) 5-3/8″ x 4-1/8″, scraps for front snowflake
Joyous Noel Glimmer Paper: Copper scraps for snowflake centers
Joyous Noel Specialty Designer Paper (N/A): 4″ x 5-1/2 or substitute Merry Merlot and heat emboss images in copper and white embossing powder
General Instructions:
Add layers to front of card. Die cut snowflakes. Sponge Copper Shimmer Paint onto large snowflake and around edges of inside snowflake. Add copper snowflake on top as shown using a glue dot. Stamp inside of card. Add ~ 4″ of ribbon to center of card front. Add large snowflake with stampin’ dimensional. Add copper thread to back of inside snowflake and add to inside of card using dimensionals. Stamp images on envelopes.
Hi Everyone! Here’s another treat holder for you using the Kraft Pillow box. It also uses the Limited Edition Snowfall Thinlit Dieavailable only the month of November 2018. This die has so many beautiful snowflake elements that I’m sure you would be thrilled to have it in your collection.
Our project today take very few pieces to get this WOW factor.
Materials needed
Kraft Box
1″ x 6-1/2″ Santa’s Workshop Specialty Designer Paper
~4-1/4″ Poppy Parade Textured Weave Ribbon
Scraps of Poppy Parade and Sparkle Glimmer Paper
Here’s a video tutorial for you!
This was another of my shoebox treat holders at our team meeting Sunday. Here’s a close-up of all our goodies! Whether you are near or far, we would love to have you part of our fun, stamping family. Here’s info if interested!
Hi Everyone! OMGoodness I love how cute this matchbook treat holder turned out! I used up some scraps from the Santa’s Workshop Specialty Designer Paper and these ADORBS chocolate Santas.
Here’s what the packaging looks like. You can find the candy at Walmart or Dollar Tree.
Yesterday at our team meeting, we had a treat holder shoe box swap. The Designer Paper Dolls that participated are shown below holding up their project! From left to right: Linda Bradly, Beth Bolinger, Sue Handshoe and Rita Bauman. Linda designed 3 tags that we could use on a treat or bag using the beautiful Joyous Noel Paper, Beth designed a bag from 1 sheet of 8-1/2 x 11 cardstock. Sue designed a cool blue tone snowflake tag, and Rita designed a slider treat holder.
The matchbook I made uses hardly any materials!
Garden Green Cardstock: 6-1/2″ x 2-1/4″. Scored at 2-3/4″, 3″, and 6″
(2) Santa’s Workshop Designer Paper 2″ x 2-1/2″
(2) Basic Black Cardstock 2-1/8″ x 2-5/8″
If you need anything to complete the project as shown, you can shop with me here! Product listing below.