Tulip Builder Punch 6″ Spring Wreath

Tulip Builder Punch 6″ Spring Wreath

Hi Everyone!

I was inspired by a wreath I had to make this cute 6″ tulip wreath. I think it’s so sweet for spring!

General Instructions:

  • Punch 20 Tulips: 10 from Daffodil Delight, 10 from Pumpkin Pie
  • Punch 12 Leaf Punch: 6 from Old Olive, 6 from Pear Pizzazz
  • Punch 24 Sprigs: 12 Old Olive, 12 Pear Pizzazz
  • Punch 5 Small Bloom flowers from Whisper White


  1.  Ink around edges if you wish.
  2.  Fold tulip in half. With hot glue, glue along back fold and attach to flat tulip. Repeat so you have 10 tulips
  3.  With hot glue – add sprigs. you can space out a little more than what is shown. It’s okay if hoop shows as it will be covered later.
  4.  Hot glue tulips, leaving space at top for ribbon.
  5.  Fill in the leaf punch images.
  6.  Add white flowers
  7.  With Dark Crushed Curry Stampin Blend, color pearls and add to flowers.
  8.  Make bow and add to top.

You can get 6″ Embroidery hoops at most craft stores. Here’s a link to Amazon if you need to see what it looks like.


Product List

March Into Spring Glitter Queen Blog Hop – Best Bunny

March Into Spring Glitter Queen Blog Hop – Best Bunny

Hi Everyone! Let’s think Spring!!!! With a winter full of ice, blizzards, grey skies and polar vortexes, I need some fun and spring-like projects, don’t you? And that’s theme of this month’s hop!

My project was inspired by my new spring décor. I’ve been itching to use Best Bunny Bundle and now that Easter in in my cross”hares”, let’s create a little punch art! The product list looks long. But really it’s a lot of things most stampers have on hand and you could sub out the colors for any scrap cardstock you have on hand.

Cardstock = CS


  • Thick Whisper White CS: 8-1/2 x 5-1/2; 3 x 4; scrap for punching
  •  Pool Party CS: 4 x 5-1/4
  •  Highland Heather CS: 3-1/8 x 4-1/8; scrap for die cutting
  •  Daffodil Delight, Flirty Flamingo, Rich Razzleberry, Soft Suede, Granny Apple Green CS: scraps for punching

General Instructions:

  • Punch out images with the following- Bunny Builder/Whisper White CS: Springs/Granny Apple Green; Bitty Blooms/ Daffodil Delight, Flirty Flamingo, Rich Razzleberry, Soft Suede. Take Your Pick Tool’s putty end makes adding these small elements a breeze!
  • With Oval Framelits, die cut out oval for the egg with Highland Heather CS. With scissors, zig zag cut for egg. For texture, run egg through the Subtle Textured Embossing Folder.
  • Stamp face on bunny. (option to use crumb cake ink and sponge dauber to ink around edges of bunny parts) Use Flirty Flamingo and Pink Pirouette Stampin Blends to color ears and cheeks. Glue face behind egg and hands on font of egg.
  • Glue springs behind egg. Add flowers. Set aside.
  • Emboss Pool Party CS with Subtle Textured Embossing Folder. Adhere to card base.
  •  With Granny Apple Green Ink, stamp grass image multiple times on bottom of Whisper White layer.
  •  Use Blender Pen to blend in color of grass.
  •  With Pool Party Ink, stamp background image.
  • Add to Highland Heather CS layer.
  • Add bunny embellishment.
  • Add Dimensionals to back of rectangle layer and add to card base.
  • With Clear Wink of Stella, flick specks of glitter all over card front.

Here’s  a close up so you can get an idea how sparkly the card is!

Video Tutorial

Product List

Let’s keep Hopping!

Dawn Griffith – Up Next!
Tracy Bradley
Sheila Curry-Myers
Davette Strange Miller
Cheryl Pierce Smith
Beth Bolinger
Mary Robinson Jayne
Dee Slater  – YOU ARE HERE


Funky Pumpkins using Petals & Paisleys Specialty Designer Paper

Pumpkin Punch ArtHi Everyone! Todays card was inspired by some funky pumpkins I got over the weekend. I love the crazy looking ones. So I thought why not make a funky pumpkin out of the Petals & Paisleys Specialty Designer Series Paper out of the Holiday Catalog! Below is this card in mass production mode! It will be used in an upcoming swap. What's great is that it doesn't take a lot of paper and it was fun to mix and match the patterns within the Designer Paper to put together all kinds of funky pumpkins!.

DSCN6152I can't officially call it punch art because I used the Layering Oval Framelits. So I guess it's die cut art! Ink around the edges to make each section pop.

DSCN6151General Instructions – Die cut the ovals. Ink around the edges with a sponge dauber and Cajun Craze Classic Ink. Glue ovals together. Free hand cut stem and vine. Glue in the back. Run Very Vanilla Cardstock through the Big Shot using Pretty Paisley Embossing Folder. Ink raised images. Stamp and punch sentiment. Add Gold Thread and Linen Tread behind.

Rich Razzelberry Cardstock 8-1/2 x 5-1/2
Very Vanilla Cardstock 4 x 5-1/4
Scraps of Cajun Craze and Mint Macroon Cardstock


Product List


A Foxy Pinterest Party using the Fox Builder Punch

Fox Builder Punch Stampin' UP!Hi Everyone! I recently held a Foxy Pinterest Party with some local stampers. What's a Pinterest Party? Taking our Pins and actually MAKING THEM! Stampin' UP!'s Fox Builder Punch is a hot, hot punch art starter for all sorts of Fox Builder Punch Critters. Above are the four we did in class.

Fox Builder Punch Bear Punch Art


This bear is ADORABLE! Other tools: Owl Builder Punch for eyes and feet. Balloon Framelit for bow.

Fox Builder Punch Mouse Punch Art

The mouse is made with additional punches of 1/2" circle punch and the 3/4" circle punch for his ears.
Fox Builder Punch Cat Punch Art
For the cat, well first there was some debate on the unfortunate color combination…LOL but I was trying to make her look like one of ours. Owl Builder Punch was used for the eyes.
Fox Builder Punch Skunk Punch Art
The skunk is "stinkin' cute {giggle}! And again, used the Owl Builder Punch for eyes.

Product List below plus scraps of cardstock for punch art! 

Team Swaps – Easter Punch Art

DSCN5879Hi Everyone! Here are the Designer Paper Dolls' (my team) Easter Punch Art February Swap Cards. Themes are given but the Dolls can make whatever they wish. Love them! Showcasing from left to right then front.


Nancy Taylor's Swap Card

Nancy's sheep is soooo cute! She left the sentiment out because she wanted us to use for Easter or possible a baby shower card! She used the 2-3/8" Scallop Circle Punch, Word Window Punch (legs), 3/4" Circle Punch for face and ears and a flower for the top. Love the embossed body!



Davette Miller's Swap 3-D

Davette made us some 3-D Easter goodies with a Bunny wrapped juice box AND the filled Polka Dot Cellophane Cone above filled with goldfish crackers. SUCH a CLEVER idea to wrap a juice box! She used (retired) Heart Collection Framelits, Leaf Framelits or dies for ears, 3/4" Circle Punch for cheeks, and the heart from Itty Bitty Punch Pack. Love the eyes…SO DETAILED!



Linda Leighty's Swap Card

Linda's GORGEOUS Easter Card uses the Elegant Butterfly and Bittty Butterfly Punches over a retired leaf die and leaf punch from another vendor. She heat embossed the sentiment on Oval Framelits layer. Background layer embossed with retired Polka Dot folder. It's a WOW card for sure!


Summer Moser's Swap Tag

Summer's Easter tag is the epitome of stinkin' cute! 1-1/2" Circle Punch, Extra Large Oval Punch, Word Window Punch, 1/2" circle Punch, heart punch from Itty Bitty Accents Punch Pack,  2-3/8 Circle punch – cut into wedge for carrot. Tag is from Chalk Tag Framelits. Whiskers are Whisper Whit Bakers twine – pull apart the strands.


Thanks Dolls for another awesome  swap!

(FYI – get another $25 in products when you join my team during Sale-a-bration which ends this month. $155 of your choice for only $99.Find out more here)

Easter Chick Punch Art 4″ x 4″ Card

Punch Art ChickHi Everyone! February's Team Swap theme was Easter Punch Art! Above is my swap card..this cute round chick. I think s/he would be super cute on a tag too!

I'll share my Team's awesome cards tomorrow 🙂

Stampin' UP! Easter Punch Art

General Instructions:

Most cardstocks will come from the Brights Collection Cardstack Pack! With Daffodil Delight cardstock, punch 1-3/4" circle and a set of wings from the Bird Builder Punch. With Pumpkin Pie cardstock, punch scallop oval, scallop circle and free hand cut beak. With Chocolate Chip or another brown cardstock, punch 2 leaf stems from Bird punch for legs.

Chick assembly: Cut a wedge out of the small scallop oval keeping 3-4 scallops for the top 'hair'. Glue to the back of the circle body. Add wings to front with Stampin' Dimensional foam dot. Glue legs behind the body. Glue beak. For easy eyes, add black candy dots!

Card base: 8" x 4" Whisper White, folded in half.
Tempting Turquoise 3-3/4" x 3-3/4". Use Curvy Trio Punch to add corner punch décor.
2015-2017 In-Color Collection Designer Paper (Cucumber Crush) 3-3/4" x 2" and use fringe scissors to make grass.

Stamp sentiment and punch out with large oval punch. Layer on scallop oval.

Product List