Scrap Strip Technique using Parisian Blossoms Specialty Designer Paper

Scrap Strip Technique using Parisian Blossoms Specialty Designer Paper

Hi Everyone! Today I have a fun and easy technique that helps use up scrap strips of designer paper. It’s the (big wink) Scrap Strips Technique LOL!

It couldn’t be easier. Glue strips of designer paper side by side. Pick an image to die cut and have at it!

I like starting with a 6″ x 6″ piece of Whisper White cardstock (not thick whisper white). 6″ wide because that the max. width of my die cutting machine. If you have lots of 12″ long scraps – you could make a 6×12.

General Steps:

  1.  Cut strips of scrap designer paper into 1/4″ x 6″ or 1/2″ x6″ OR whatever size you wish! 1/2″ shown above. AND feel free to mix and match the widths!
  2. Arrange the strips in a pattern you like.
  3. Glue using Multipurpose glue.
  4. Die cut an amazing, one of a kind embellishment or layer!

To make this project.

  •  Die cut Scrap Strip using Stitched so Sweetly.
  • Stamp sentiment with VersaMark, add Gold Embossing Powder and heat set. Die cut.
  • Add sentiment using a glue dot.
  • Fold bag flap.
  • Tie ribbon and add Scrap Strip embellishment using dimensionals.

Product List

Versamark Pad

Enjoy using this technique! If you need anything to complete the project as shown, click on any of the images above to shop with me!

Gold Pizza Box with Wobble Gift Card – It’s a Wrap Glitter Queen Hop

Gold Pizza Box with Wobble Gift Card – It’s a Wrap Glitter Queen Hop


Hi Everyone!

Thanks for visiting today. We have our Glitter Queen “It’s a Wrap!” Hop  today! My project features the Gold Mini Pizza Box.

What’s great about the box is it’s an S=SS Wow box. Shiny = Something Special! Right? you wouldn’t put something hum-drum in a gold box right?

And there is an action wobble spring that holds and wobbles the gift card holder on the inside lid when opened. I found the wobble springs on Amazon here, but you can find them at craft stores too.  The gift card stands out 3D from the lid leaving room in the box for yet another surprise!

Measurements:

Wrapped in Plaid Specialty Designer Paper: 6 x 1-5/8, (2) 3-1/4 x 3-1/4

Whisper White Cardstock: (2) 3/4 x 3-1/2

Here’s a video tutorial for you showing how to make!

Tip: You can substitute a 1″ x 5″ Thick Whisper White for the wobble spring. Score every 1 inch and fan fold.

All items listed below the Hop Order. Please visit each on the Hop!

Dawn Griffith
Dee Slater – You Are Here
Sheila Curry-Myers – Up Next
Cheryl Pierce Smith
Beth Bolinger
Tracy Bradley

Product List

Glitter Queen Blog Hop: Halloween Treat Holder from 6×6 Sheet of Paper

Glitter Queen Blog Hop: Halloween Treat Holder from 6×6 Sheet of Paper

Hi Everyone! Welcome to another Glitter Queen Blog Hop! We are bring you all kinds of Halloween Treat Holders to get you in the “spirit” of Halloween!

AND I am offering Blog Candy! Leave a comment on this post to be entered to win!

De-Stashing your Stash!

Monster Bash Designer Paper is a lot of fun. But if you’re like me, there is always a sheet or 2 of paper left over from the pack. I’m on this mission to use my seasonal designer paper up! This treat holder is great way to help that mission! You get 4 treat holders out of 1 sheet of paper!

Materials:

  • Cardstock (really any color – grab your scraps!) 2-1/2″ x 3″. Score at 3/4″ all 4 sides.
  • Designer Series Paper – 6″ x 6″

General Instructions: Tip! Watch video below and use the written

  •  Make box bottom base with cardstock
  •  Add Snail Adhesive (Or use Tear & Tape)  along the bottom and one side of the backside of the Designer Paper.
  •  Wrap bottom of Designer Paper (adhesive on bottom) around the box base.
  •  Adhere side of paper.
  •  Round corners and punch center hole for ribbon.
  •  Fill with treats and tie with ribbon. OR you can skip punching hole and staple top.
  • Stamp images and decorate!

Video Tutorial

Product List

Now please keep hopping! Shelia’s sure to give us a sweet treat!

Dawn Griffith
Beth Bolinger
Tracy Bradley
Dee Slater You Are Here!
Sheila Curry-Myers Up Next!
Cheryl Pierce Smith

 

Baby Shark & Family Corner Bookmark – Kids Craft

Baby Shark & Family Corner Bookmark – Kids Craft

Hi Everyone! What’s spookier than a family of sharks!? And how fun to add this to your treat bag! Or put a little candy inside his Baby Shark mouth 🙂 Or better yet, have your children or grandkids make for their friends for Halloween.

Start with a 6″ x 6″ cardstock.

  • Baby Shark – Daffodil Delight
  • Mommy Shark – Melon Mambo
  • Daddy Shark – Pacific Point
  • Grandma Shark – Grapefruit Grove
  • Grandpa Shark – Granny Apple Green

Product List


See photos below to assemble! My description steps will following the order of the pictures:

  1. Start with point at top.
  2. Bring bottom point up to top point. Use bone folder for crisp fold.
  3.  You now have a triangle. Bring right bottom point up to meet top point. Use bone folder.
  4. Repeat left point.
  5. Unfold.
  6. Take the front layer top point directly down to the fold. This creates the pocket.
  7.  Take the right side point and bring in up and tuck inside the “pocket”. The pocket will not fully develop until booth sides tucked.
  8.  Take the left side point and  tuck into the pocket.

Now we need some shark accessories! Turn it around so the tucked part is up to the top of your work surface as shown:
Materials for the shark:

  • 2-1/2″ x 2-1/2″ squares – 1 Whisper White, 1 Petal Pink  – Free hand cut at the diagonal
  •  1″ x 3-1/2″ Whisper White
  •  2″ x 2-3/4″ in shark cardstock color
  • 2-3/4″ x 2-3/4″ in shark cardstock color
  • Googly Eyes – I like the big ones!

For the 2″x 2-3/4″ rectangle – cut as shown to make top fin and side fins. Use Multipurpose glue to adhere to back. TIP! Not shown.- Adhere the 2-3/4″ square to the back of your shark. This covers the fins and adds a finished look to the bookmarker.

Update! Here’s a Video Tutorial for you!

Enjoy making your Baby Shark and Family Corner Bookmarks!

Striped Treat Bags Going for Gold Alternative Projects from Facebook Live

Striped Treat Bags Going for Gold Alternative Projects from Facebook Live

Hi Everyone! Here are the projects from last night’s Facebook LIVE!

CLICK HERE to see the replay to learn how to make these projects.

Above:
Whisper White Insert:4-1/4″ x 3-1/2″
Fold bag and tie ribbon around to secure. Add embellishments to outside. Round corners, stamp and add tab to insert.

Measurements:
Stitched Rectangle 2-5/8″ x 3-7/8″
Gold Glimmer 2-3/4″ x 4-/8″

A fun idea! Add bag to inside of card!

 

Product List

Hinged Box – Glitter Queen Blog Hop

Hinged Box – Glitter Queen Blog Hop

Hi Everyone! Thanks for stopping by our Glitter Queens Monthly Blog Hop! We are thinking outside the box…by creating boxes for you!

What I love about this box is that it has a HINGED or attached Lid!

Here’s some ideas of what you could gift in it!

  •  3″x3″ Notecards and envelopes
  •  Bracelets and other jewlery
  •  Candy (giggle…always candy!)
  •  Gift cards
  •  Any other small gift fitting the inside dimensions of ~ 3-1/2″  x 1-1/4″
  •  Party Favors

 If you use the Gift Box Punch Board, it make the tab cuts for you and looks more finished.

We are entering a phase in our family of weddings and babies! I have my box decorated for my niece’s wedding shower. This box is inspired from a pillow box swap from Kris Miller.

Box Measurements:

  • 6-3/8″ x 11-3/8″.  (Will need a 12″x 12″ cardstock size to start. If you want to use Petal Pink, you can get the Subtles Collection or the Floral Romance Cardstock Pack. Or Uses 12×12 Whisper White)
  • Score along the 11-3/8″ side at: 1-3/8″, 3-3/8″, 6-3/8″, 8-3/8″
  • Score along the 6-3/8″ side at: 1-3/8″, 5″
  •  TIP! in my Video Tutorial (below) I’ll show you how you can use the Gift Bag Punch Board to make professional looking tabs. 
  •  If you don’t have the Gift Bag Punch Board yet, you can use the cut guide above to cut your tabs. They just won’t be as fancy!

Designer Paper Measurements

  • For Box: 3-1/4′ x 2-3/”, 3-1/4″ x 1-3/4″
  •  For Top Banner Accent: 1-1/2″ x 4-1/4″

Other cardstock for Top  Banner Accent:

  • 2″ x 4-1/2″, 1″ x 4″

General instructions: See video for full instructions. Using measurements and template guide above, make box but do not glue flaps yet. Add designer paper while flat as it’s easier. Glue box tabs using Multipurpose Glue or Tear & Tape. Using the Banner Triple Punch, punch banner tails on the top accent layer. Glue layers together and score at 2″ along the long side. Glue to the lid. 

You can find quick links to the products used below. Please keep hopping! Up next is Tracy!

Dawn Griffith
Sheila Curry-Myers
Davette Miller
Cheryl Pierce Smith 
Beth Bolinger – Where You Came From
Dee Slater – You are here
Tracy Bradley  – Up Next

Product List